Quintum Tenor configuration sample for DataTechLabs ArrowBilling
Friday, 20 April 2007
This document provides a sample about how to configure Quintum to work with Data Tech Labs Arrow Billing.

Table of Contents

Configuration Example Based on Tenor Generation

Two Generation of Quintums are available:
  • First Generation Quintum (A400/A800/D800/D1600/D2400/D3000 etc.)
  • Second Generation Quintum (AS/AF/AX/BX/DX/CMS etc.)
Show Top

First Generation Quintum

Command Line Example for First Generation Quintum: 
Quintum:test> co
config# rad user
config radius user# host p 
config radius user# sharedsecret 
config radius user# accountingtype 2
config radius user# print

host p <billing server ip>
authenticationport p 1812
accountingport p 1813

host s 0.0.0.0
authenticationport s 1812
accountingport s 1813

retry = 3
timeout = 5
accountingtype = 2
billingvendor 0
sharedsecret ******
config radius user#

Show Top

Second Generation Quintum

Command Line Example for Second Generation Quintum: 
Trying 192.168.170.30...
Connected to 192.168.170.30.
Escape character is '^]'.
<102b0ff3> Login:admin
Password:       


Quintum#co
config# ri userserver
config-RadiusInfo-UserServer# set psipa 
config-RadiusInfo-UserServer* set at 2
config-RadiusInfo-UserServer* set ss 
config-RadiusInfo-UserServer* sub
config-RadiusInfo-UserServer# print

RadiusInfo-UserServer :
  name                         : User Authentication Server
  PrimaryAuthenticationPort    : 1812                default             
  PrimaryServerIPAddr          : <billing server ip>
  PrimaryACcountingPort        : 1813                default             
  SecondaryAuthenticationPort  : 1812                default             
  SecondaryServerIPAddr        : 0.0.0.0
  SecondaryACcountingPort      : 1813                default             
  RetryCount                   : 3                   Retry Count,default 
  Timeout                      : 5                   5 seconds Time Out  
  AccountingType               : 2                   Type 2;send 2 acct. 
  SharedSecret                 : secret              Up to 63 chars      
  BillingVendor                : 0                   support Cisco;defaul
  UpdateAccountingType         : 0                   disabled,default    
  UseModifiedDN                : 0                   disable             

config-RadiusInfo-UserServer#

Show Top

Setting up Arrow Billing for Quintum

Adding Data Source

To enable receiving AAA requests from Quintum, follow these steps:
  1. Click Tools > Data Sources
  2. Click on the link Add Data Source.


  3. In "Add Data Source" screen fill following information:
    • Source Name - any descriptive name for this device, example "Quintum1"
    • NAS IP Address - IP address of this device
    • Radius Client IP Address - leave checkbox checked if Radius packets will be received from same IP, otherwise uncheck it and enter IP Address which will send Radius requests
    • Shared Secret - secret used between device and Billing Mabager Radius server"
    • Parent Source - select NAS from list which will receive traffic from this device if it is also Data Soucre for this Arrow Billing
    • Source Type - Quintum
    • Enabled - check this box to make the data source enabled.
  4. Submit Entry by clicking on the button Create.
Show Top

Common Issues and FAQ

Is it possible to provide Prepaid Calling Card Service using Quintum with Data Tech Labs Arrow Billing?

Yes, it is Possible. You will need to have IVR server (if it is first generation) or IVR files should be available in Quintum in respective directory (/hd/ivr). And IVR should be enabled in pstn or pbx trunk group to activate Prepaid Calling Card mode.

Show Top



Digg!Del.icio.us!Slashdot!Technorati!Free social bookmarking plugins and extensions for Joomla! websites! title=
 
[ Back ]